We use cookies to ensure that we can provide you with the best experience on our website. By using our website, you are consenting to the use of cookies as set out in our policy. OK
Show Prices Inc VAT
Help
  • Sign up for our Newsletter

Analog Devices ADRF5130 Silicon Switch

Date Published : 03/03/2017 Share with:

Analog Devices has introduced a high power (44 watts peak) single-pole, double-throw (SPDT) silicon switch that enables designers to reduce hardware size and bias power consumption in cellular radio systems.
As the next generation of communications infrastructure trends toward higher data capacity, cellular radio front ends must scale down in size and provide faster speeds to meet the demands of increased data usage. ADI’s ADRF5130 switch meets these requirements through a high level of integration that eliminates the need for external components. The switch also reduces power consumption to more efficient levels by operating on a single low-voltage supply with extremely low current consumption compared to existing pin-diode-based solutions.

The ADRF5130 is specified at 0.7-GHz to 3.5-GHz frequency band with typical 0.6-dB insertion-loss, high isolation of 50 dB, excellent linearity of +68 dBm and peak power handling of 44 watts during continuous operation mode. The device features robust 2000-V electro-static-discharge (ESD) protection on all device pins. It also incorporates a fast CMOS-compatible control interface with switching time less than 1 us. Additionally, a symmetrical circuit architecture allows the RF inputs to be used interchangeably in high power applications.

The ADRF5130 is manufactured using silicon technology, and is housed in a small 4 mm × 4 mm LFCSP SMT package.

 

Click below video to see an overview of the ADRF5130 and other new Silicon Switches from Analog Devices

Click below video to see how ADRF5130 Silicon Switches from Analog Devices can replace PIN Diodes

Click here for more information or to buy from Anglia Live.

Click here to download the datasheet

The ADRF5130 silicon switch is supported by the ADRF5130-EVALZ evaluation board. This is a fully populated, RO4350 based evaluation board and it is constructed of an 8-layer material for thermal management. A single power supply of 5 V should be applied to the VDD test point while ground reference is connected to the GND test point. A single control voltage of 0/+5 V that selects the switch state is applied to the VCTL test point. The RF input signal can be applied to the PC mount SMA RF connector labelled RFC and the RF output signals can be measured on the PC mount SMA RF connectors labelled RF1 and RF2.

Anglia are offering customers a FREE Evaluation board and samples of ADRF5130 silicon switch from Analog Devices, please fill in the form below to register your interest now.

 

Requesting....

 

To register for a FREE evaluation board and samples of the ADRF5130 silicon switch from Analog Devices please fill in the form below.

First name *
Last name *
Company *
Telephone *
Email Address *
Project Name
Project Volume  *
Project Description

FREE samples for UK and Ireland customers only, subject to availability.

 

You may also be interested in

Design Techniques for Signal Conditioning with Anglia and Analog Devices, register now for a Free Workshop place

Anglia and Analog Devices are hosting two in depth technical workshops in April. The workshops will focus on the exploration of the signal chain and techniques to quantify noise, signal conditioning of analog /digital converters.


Introducing the AD4130-8 Ultra Low Power 24-Bit Sigma-Delta ADC from Analog Devices. Evaluation board and samples available from Anglia.

The AD4130-8 from Analog Devices is an ultra low power, high precision, measurement solution for low bandwidth battery operated applications.


Maxim Integrated products now available from Anglia Live

Maxim Integrated is now part of Analog Devices - The collective expertise from Maxim and Analog Devices in areas like automotive, connected factory, electrification and digital healthcare are helping to make "what if" become "what is".


Introducing the ADE9430 High Performance Polyphase Energy and Class S Power Quality Monitoring IC from Analog Devices. Evaluation board and samples available from Anglia.

The ADE9430 from Analog Devices is a highly accurate, fully integrated, polyphase energy and power quality monitoring device.


Focus on Motion with the ADXL367 Digital output MEMS accelerometer from Analog Devices that offers excellent resolution and ultralow power consumption. Evaluation board and samples available from Anglia

The ADXL367 from Analog Devices is an ultralow power, 3-axis microelectromechanical systems (MEMS) accelerometer that consumes just 0.89 μA at a 100 Hz output data rate and 180 nA when in motion-triggered wake-up mode


Quad-Channel Isolators from Analog Devices feature Integrated DC-to-DC converter, samples and evaluation board available from Anglia

The ADuM642xA family from Analog Devices are quad-channel digital isolators with an isoPower, integrated, isolated dc-to-dc converter.


ANGLIA-LIVE.COM IS A B2B WEBSITE ONLY
© 2024 Anglia Components Plc. All rights reservedTerms & ConditionsTerms of UsePrivacy PolicyAnti Bribery Statement