Anglia Components |
||||||||||||||||||||||||||||||
|
AdvancedMC™ Plug from HARTING improves reliability of card edge connections
The new connector replaces the card edge and associated gold contact pads of the AdvancedMC™ module, which can suffer from variable surface quality and unstable tolerances and are expensive to produce. The AdvancedMC™ Plug, on the other hand, is manufactured using a tightly specified process and offers the highest degree of contact reliability and protection against wear and corrosion. The design of the new connector means that the insertion force of the module is reduced significantly, while the PCB thickness is no longer limited to the specified value of 1.6 mm ± 10%. Depending on the PCB design, the signal integrity behaviour is superior to that obtained with the card edge gold pads. The AdvancedMC™ Plug is mounted on the module via the pin-in-hole reflow soldering technique, and is pick-and-place compatible. It is designed according to the AMC.0 specification and can be used in both MicroTCA™ and AdvancedTCA™ applications. It can be used for MicroTCA™ carrier hub (MCH) applications, in conjunction with the MCH plug. For more information on the full range of Harting products available from Anglia please call +44 (0)1945 474747 or email info@anglia.com |
|||||||||||||||||||||||||||||
This news article was originally published in February 2008.
|
15/2/08