Anglia Components |
|||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
|
High junction-temperature TRIACs from STMicroelectronics enable smaller heatsinks and higher power density
The high-junction-temperature TRIACs will enable manufacturers to lower their costs by using considerably smaller heatsinks, and also allow the end product to benefit from more reliable operation in hot environments. The use of conventional TRIACs, which are specified at 125 degrees C junction temperature, can cause a loss of control of the AC load in environments above this temperature, which can lead to hazardous application behavior, due to device parameter derating above 125 degrees C. However, ST’s new HiTj Snubberless™ series requires no derating of any of its parameters up to the maximum junction temperature, and, in fact, achieves a turn-off performance at 150 degrees C, which is three to four times better than normal. In addition, the TRIACs deliver high-noise immunity of up to 1500V/microsecond. Further cost savings are possible for manufacturers through the elimination of RC snubber circuits and noise filters. The TRIACs are ideal for use in universal motor-control applications, such as vacuum cleaners, washing-machine drum motors, and industrial drives; in hot environments such as cookers, ovens, kitchen hobs and coffee machines; and for achieving higher power density on PCBs, for heater and high-power motor control. They can also replace conventional TRIACs in closed environments where the ambient temperature is too high. The HiTj TRIAC series is produced in TO-220AB, TO-220AB insulated (ceramic), and in D2PAK surface-mount packages, for maximum versatility. They are all 600V devices, with current ratings of 8A, 10A, 12A, 16A and 20A. The sensitivity range offered today is 35mA to 50mA, and will soon be extended with 10mA devices. For more information on the full range of STMicroelectronics products available from Anglia please call +44 (0)1945 474747 or email info@anglia.com
|
|
|||||||||||||||||||||||||||||||
This news article was originally published in October 2008.
|
13/10/08