Anglia Components

   

 

 
Manufacturers
Select one of our dedicated manufacturer sections
 
Hammond Electronics Launch 1552 Family of Hand-Held ABS Plastic Enclosures, samples available from Anglia
Hammond Electronics has launched the new 1552 family of elegant and functional hand-held enclosures. Initially available in six sizes, the 1552 family of enclosures are IP54 rated for dust and moisture ingress and are flame retardant to UL94-V0.
 

You can now follow us on Blogger, Facebook, Twitter, WordPress or Live Journal by clicking on the logos below.

BloggerFacebookTwitterWordPressLive Journal

Rate this page
1:Poor 5:Excellent
2 3 4 5
 
 

 

 

Ultra-Miniature Transil™ family from STMicroelectronics delivers 400W suppression capability

 

STMicroelectronics has introduced the SMM4F family of unidirectional Transil™ voltage surge-suppression diodes, which improves performance in three key areas by delivering high protection within a small footprint, reducing leakage current for low losses, and raising maximum junction temperature for enhanced reliability.

The SMM4F family protects against 400W 10/1000 microsecond surges and has an ultra-compact footprint of 3.8 x 1.9mm. Smaller than existing 400W devices in SMA packages, the SMM4F diodes also provide 100% more protection than 200W alternatives currently offered in the 10% smaller SMF outline. Low leakage current of 0.2 microamps ensures low-loss performance for use in battery-operated devices or other low-power applications. With a maximum leakage current of 1 microamp at 85 degrees C, the SMM4F family is suitable for telecom applications.

The family includes a total of 14 devices with stand-off voltages between 5V and 33V providing a suitable part for the majority of applications requiring surge suppression diodes, including SMPS, consumer electronics, computing devices and telecom equipment. Each is rated to 175 degrees C maximum junction temperature, allowing a greater safety margin than conventional alternatives that are typically rated to only 150 degrees C.

ST has also characterized additional parameters, providing designers with reliable data to predict behavior accurately under a variety of operating conditions. The maximum clamping voltage and peak-power current are specified for surges of 8/20 microseconds in addition to 10/1000 microseconds, allowing designers to verify protection meeting the widely accepted IEC61000-4-5 standard. Designers also benefit from accurate data for dynamic resistance, variation of breakdown voltage with temperature, and leakage current versus junction temperature. ST is the only manufacturer to provide this information, which allows designers to calculate the clamping voltage accurately, according to actual surge-current and junction-temperature values.

For more information on the full range of STMicroelectronics products available from Anglia please call +44 (0)1945 474747 or email info@anglia.com

Alternatively, click on this link to go to the main STMicroelectronics section where you can view other news articles and product data.

back to product news

Bookmark with: info?

 

 

 

 

 

This news article was originally published in June 2008.

Please read our Privacy Statement in conjunction with the Terms and Conditions and Terms of Use of this Website.

11/6/08