DC/DC converters support DDR memory applications from Murata Power Solution

		Murata Power Solutions has introduced two new small form-factor point-of-load (POL) DC/DC Converters that deliver high-efficiency and high current density for powering DDR1, DDR2 and DDR3 memory, as well as general purpose ICs in multiple applications.
• Small form factor with 1U height • Programmable 0.6V to 3.5V output • 50A/in3 current density and 88% efficiency

The 60A-rated VCN60BADJTU-1C and 70A-rated VCN70BADJTU-1C provide high efficiency, high bandwidth solutions for a wide range of applications such as computer equipment, telecommunications hardware, test equipment and industrial automation.

Both the 60A and 70A DC/DC converters have a current density of approximately 50A/in3 and efficiency of 88% at full load. Programmable output voltage range is 0.6 to 3.5VDC, with a typical set point accuracy of 0.5%. Input voltage is 12VDC, and the modules have an industry standard height of 1U that can help simplify integration.

Other key features of the VCN60BADJTU-1C and VCN70BADJTU-1C include a soft start circuit, differential remote sense, power good signal, pre-bias turn on, and output enable. Comprehensive safety features that include over-voltage, over-current and over-temperature protection further enhance the appeal of the modules to design engineers.

The VCN60BADJTU-1C has overall dimensions of 61mm (L) x 9.5mm (W) x 31.8mm (H), while the VCN70BADJTU-1C measures 61mm x 16.8 x 31.8mm. The pinout of both devices is identical, allowing customers to use interchangeably based on power requirements of different applications.

For more information, or details on the full range of MurataPS products available from Anglia, please call +44 (0)1945 474747 or email info@anglia.com

Alternatively, click on this link to go to the main MurataPS section where you can view other news articles and product data.

back to product news

Bookmark with: info?

Delicious Digg Reddit Facebook StumbleUpon Google Newsvine Yahoo Show more