Supplier sections
Introducing the AD4130-8 Ultra Low Power 24-Bit Sigma-Delta ADC from Analog Devices. Evaluation board and samples available from Anglia.
Rate this page
![Cree XLamp® XT-E & XM-L High Voltage White LEDs enable better lamp replacements](https://www.anglia.com/newsarchive/115px_images/3145.jpg)
Optimised for non-directional and small LED replacement lamps such as B10 candelabra, E17, GU10 and A19 bulbs, Cree XLamp XT-E and XM-L High Voltage White LEDs deliver both high lumen output and high efficacy in a small footprint.
![New low-profile MKP and MKT film capacitors from EPCOS for applications requiring limited insertion height](https://www.anglia.com/newsarchive/115px_images/3137.jpg)
04 January 2012
EPCOS has extended its wide range of MKP and MKT film capacitors with a pitch of 37.5 mm by case sizes with maximum heights of 15 and 19 mm.
![Cree launches new high performance XLamp® XT-E Royal Blue LED and patent licensing program for remote phosphor applications](https://www.anglia.com/newsarchive/115px_images/3103.jpg)
02 December 2011
Optimised for use in remote phosphor lighting and other applications with similar requirements, the new XLamp XT-E LED delivers the industry's tightest wavelength bins with category leading brightness to simplify designs and lower system costs.
![Cree redefines high voltage LEDs with XLamp XT-E and XM-L LED](https://www.anglia.com/newsarchive/115px_images/3110.jpg)
09 November 2011
Cree has announced the commercial availability of high voltage XLamp XT-E and XM-L LEDs. These new LEDs can enable the use of more efficient, smaller drivers to lower cost for compact lighting applications such as candelabras and retrofit lamps.
![LEDiL announces availability of LENA series AR111 reflectors for Cree CXA2011 LEDs](https://www.anglia.com/newsarchive/115px_images/3104.jpg)
LEDiL’s precision-moulded 111mm dia. reflector series allows for rapid deployment of new lighting solutions using lighting class LEDs and offers designers a more reliable, low cost choice than traditional drawn or spun metallic reflectors.
![Cree continues to lead LED industry with even brighter lighting-class LED](https://www.anglia.com/newsarchive/115px_images/3102.jpg)
Cree has extended the advantage of its innovative, industry-leading XLamp® LED family by announing new levels of performance for its highly efficient XLamp XP-G LEDs.
![TCI launches DC WOLF MP, a multi power LED driver with active PFC](https://www.anglia.com/newsarchive/115px_images/3105.jpg)
This new driver has been conceived and designed for LED down-lighting installations where no regulation is required but where it is essential to have a lighting device with 0.95 active power factor correction.
![Hirose’s DF59 series provides a multifunctional LED connection system](https://www.anglia.com/newsarchive/115px_images/3089.jpg)
Hirose has announced the new DF59 series connector system, primarily dedicated to the LED lighting market but also suitable for many other applications where small connectors are required.
![AVX develops ultra-low profile LED lighting connectors for fluorescent light retrofit & replacement](https://www.anglia.com/newsarchive/115px_images/3061.jpg)
21 September 2011
AVX has developed two new series of connectors for LED lighting systems that maintain the same luminosity and light intensity as fluorescent strip lights, featuring the lowest profile in the industry.
![Murata introduces innovative Piezo Microblower for cooling in small spaces](https://www.anglia.com/newsarchive/115px_images/3001.jpg)
Murata has introduced an innovative Microblower product which uses a piezoelectric ceramic based drive system that allows for an extremely compact and low profile unit. Using ultrasonic vibration of the piezoelectric ceramic material.