Supplier sections

ABL Aluminium Components

Abracon LLC

Advantech

American Technical Ceramics

Analog Devices

Antenova

Anysolar

Arcol

Arcolectric

Avalue

Bel components

Bergquist

Binder

Bivar

Bloomice

Bolb Inc

Bourns

Boyd

Bulgin

Bussmann

C&K

Calinar

Cambion

CamdenBoss

Carclo

CEL

Ceramate

Cliff Electronic Components

Conquer

Cornell Dubilier

Cosmic

Co-Tron

Cree

Cre-Sound

CTC

CTi

Deltron

Digi International

Diptronics

EAO

Eaton Bussmann/Coiltronics

ECE

Ecliptek

Efficient Power Conversion

Efore

Ekinglux

Elettronica Rossoni

EPCOS

EPOC

ESI

Eurohm

Fischer

Fox Electronics

Haimooo

Hammond Manufacturing

Harting

Harwin

Herald

Hirose

Hirschmann

Hittite

Honeywell

Hongfa

Hope RF

Hudson

Ilsi

Inalways

Invac

Ixys

JDI Europe

JNC

Kang yang

Keystone

Khatod

Kingtek

KOA

KYOCERA AVX

Laird Technologies

LEDIL

Linear Technology

LITE-ON Optoelectronics

Littelfuse

Lumberg

Lumileds

Magnetix

Magnetone

Marl

Mascot

Mitsubishi

Mmd

M-Pro

Mueller

Murata

MurataPS

Neutrik

Nichicon

Nover

Ohmite

OKO

Omron

Panasonic

PANJIT

Phoenix Contact

Pickering

Piher

Polymer Optics

Quay RF

Renata

RF360

ROHM

Roxburgh

Samsung

Schaffner

Schurter

Sensirion

Shindengen

SIMCom

Solomon Systech

Stanley Electric

STMicroelectronics

Studiomate

Taicom

Taiwan Semiconductor

Taiway

Taoglas

TDK

Tdk Invensense

Telit Cinterion

Tianbo

Titan-Opto

Tokyo Parts

Toshiba

Varta

Vigortronix

Walsin

Warth

WIMA

Winbond

Introducing the FunctionMAX family of board-to-board connectors from Hirose with floating contacts and support for high-speed data transmission, samples available from Anglia.

The FunctionMAX family of connectors from Hirose are Board-to-Board connectors Engineered for the demands of modern electronics systems, Hirose's FunctionMAX connectors redefine board-to-board connections.

Click Here

Rate this page

You can now follow us on Blogger, Facebook, LinkedIn, Twitter, WordPress, Live Journal or You Tube by clicking on the logos below.

Anglia delivers by

Recognised as the UK’s number one for reliability, flexibility and customer service.

STMicroelectronics Extends Feature Integration and Flexibility of STM32F4 Access Line

STMicroelectronics have added two new microcontroller lines which increase energy efficiency, flexibility, and feature integration at the high end of the STM32F4 Access Line for high-performance embedded designs. The new STM32F413/423 MCUs are qualified for operating temperature ranges up to -40°C to 125°C. The new MCUs target always-on sensor acquisition and general-purpose industrial applications and present a robust and cost-effective upgrade from STM32F1 MCUs.

STMicroelectronics provide application note (AN4904) to help migrate microcontroller applications from STM32F1 Series to STM32F4 Access lines by providing guidance on hardware compatibility, boot-mode selection and peripheral migration. Click here to download the application note.

The STM32F413 and crypto-enhanced STM32F423 integrate up to 1.5MB Flash and unusually dense SRAM of 320KB. These are the most highly featured of the STM32F4 Access Lines, with rich audio capabilities including a Serial Audio Interface (SAI) and an enhanced voice-acquisition interface with multi-channel Digital Filter for Sigma-Delta Modulators (DFSDM) that enables low-power sound localization and beam forming. The devices also provide superior peripheral integration, with two 12-bit Digital-Analog Converters (DACs), up to 10 UARTs, and three CAN 2.0B Active interfaces. The crypto-enhanced STM32F423 also has a True Random-Number Generator (TRNG) and AES-256 cryptographic hardware accelerator.

Sitting at the top of the STM32F4 Access Lines, the new MCUs introduce a 100MHz dual-mode Quad SPI for connecting serial off-chip memory, 16-bit Flexible Static Memory Controller (FSMC) for external SRAM, PSRAM or NOR Flash, up to 16-bit QVGA or 8-bit WQVGA LCD interface, and USB OTG with Link Power Management (LPM) and dual power rails that save external level shifting.

In addition, both lines feature a new RAM-access scheme that uses the instruction and data (I/D) buses and the system bus (SBUS) to connect to separate RAM1 (256KB) and RAM2 (64KB) areas thereby minimizing contentions. A new, enhanced DMA Batch Acquisition Mode (BAM+) takes advantage of these separate RAM1 and RAM2 areas to process code and data extremely efficiently in sensor-hub applications.

Delivering high performance with best-in-class energy efficiency, the new STM32 microcontrollers combine the 100MHz 125DMIPS/339 EEMBC^© CoreMark^© ARM^© Cortex^©-M4 core with ST’s power-saving Dynamic Efficiency technologies that cut RUN mode current to as little as 112µA/MHz. These Dynamic Efficiency technologies include the ST ART Accelerator™ for zero-wait execution from Flash, and the supply-voltage extending down to 1.7V, to maximize the battery life of always-connected devices.

The STM32F413 and STM32F423 are available in seven package options from 4.039mm x 3.951mm WLCSP81 to 144-pin LQFP.

Click here for more information or to buy from Anglia Live.

Click here to download the datasheet for the STM32F413 series.

Click here to download the datasheet for the STM32F423 series.

Designers can immediately start their projects using the NUCLEO-F413ZH development board. This STM32 Nucleo-144 board comes with the ST-LINK/V2-1 debugger/programmer, software libraries and examples, and can be used directly with ARM mbed™ online resources.

Click here to download the NUCLEO-F413ZH data brief

Anglia are offering customers a FREE NUCLEO-F413ZH Development board from STMicroelectronics, please fill in the form below to register your interest now.